TOP
Image Alt

Archive

VMC Machining Operation Starting of Machine Power ON Input MCB on Stabilizer. Turn ON air pressure. Press Power ON Button on operating panel. Remove and insert plates in the switch above machine doors. Press reset button. Press Power up button. Tool Setup

Production Flow This article will guide you to the process involved in the production of ProtoCentre999 and its related documentation needed. Refer to the bill of materials to ensure the parts are available before you start the production. BOM for pc999 is

Support should be removed properly. No weak/broken parts. If the model is painted it should be painted properly. In cranio models, both moulds(upper and lower) should fit properly over each other. In tumour models, all the arteries should be

Mould should be completely packed. No holes should be there to prevent leaking. One part Base should be mixed with one part catalyst for 1 minute. Silicon should be poured in the mould within 5 min. Setting time: 2.5

In theory, a 3D medical model can be printed from any volumetric image data set that has sufficient contrast to differentiate tissues. The imaging data may also be a fusion of images from different (even nonmedical) imaging modalities. CT images

About Aha! Hello folks! I founded Aha with a vision to create a platform for realizing ideas. Aha! ideas, to be specific. Ideas which are so unique they gift the observer new realizations and opens new dimensions! Over time, 3D printers became a